T162
T162 is a high-efficiency ashless dispersant. It is a high-efficiency succinimide ashless dispersant produced by thermal addition process with high activity polyisobutylene as raw material. Compared with general ashless dispersants, t162 has better soot dispersion ability, does not contain chlorine,
Product introduction
T162 is a high-efficiency ashless dispersant. It is a high-efficiency succinimide ashless dispersant produced by thermal addition process with high activity polyisobutylene as raw material. Compared with general ashless dispersants, t162 has better soot dispersion ability, does not contain chlorine, meets the development requirements of environmental protection, and is mainly used for diesel engine oils above CH4.
Packaging and storage:
The maximum temperature of this product shall not exceed 85 ℃ during storage, handling and oil mixing; In case of long-term storage, the maximum temperature shall not exceed 45 ℃. This product is non flammable, non explosive and non corrosive. It is not necessary to take special precautions during use, but the general precautions for handling concentrated chemicals and adding additives to the base oil should be observed. If swallowed carelessly, it will be toxic to some extent, but not more toxic than ordinary petroleum products; In case of skin contact, wash thoroughly with detergent, soap and water.
Product parameters
performance | index | Experimental method |
Total base number mg KOH/g | 40~50 | SH/T0251 |
nitrogen content % | 1.7~2.0 | SH/T0224 |
density (20℃) kg/m3 | 900~960 | GB/T2540 |
viscosity(100℃)mm2/s | <500 | GB/T265 |
chroma | <4.0 | GB/T6540 |
impurity% | <0.08 | GB/T511 |
Opening℃ | >180 | GB/T267 |
water content % | <0.08 | GB/T260 |
Dispersity SDT | >55 | 附录 |