T154B
T154b is a borated succinimide dispersant. It is a borated ashless dispersant prepared by thermal addition process with high activity polyisobutylene (=1000) as raw material. It has excellent detergency and dispersibility, can inhibit the formation of carbon deposition and paint film on the engine p
Product introduction
T154b is a borated succinimide dispersant. It is a borated ashless dispersant prepared by thermal addition process with high activity polyisobutylene (=1000) as raw material. It has excellent detergency and dispersibility, can inhibit the formation of carbon deposition and paint film on the engine piston, also has anti-oxidation and anti-wear properties, can improve the compatibility between oil and fluororubber seals, and reduce the high-temperature corrosion of copper lead bearing shells. The product does not contain chlorine and meets the development requirements of environmental protection. Combined with detergent, it can solve the problem of low-temperature oil sludge of engine and reduce the deposition of paint film and carbon on high-temperature parts of engine The reference dosage in oil products is 1% ~ 5%.
Precautions for product packaging, storage, transportation and use:
Product packaging, storage, transportation, delivery and acceptance shall be carried out according to sh0164. This product is non flammable, non explosive and non corrosive. Attention shall be paid to waterproof. Special prevention is not necessary for this series of products, but the general prevention methods for handling concentrated chemicals and adding additives to base oil shall be observed In case of skin contact, wash thoroughly with detergent, soap and water, and prevent swallowing.
Packaging and storage:
The maximum temperature of this product shall not exceed 85 ℃ during storage, handling and oil mixing; In case of long-term storage, the maximum temperature shall not exceed 45 ℃. This product is non flammable, non explosive and non corrosive. It is not necessary to take special precautions during use, but the general precautions for handling concentrated chemicals and adding additives to the base oil should be observed. If swallowed carelessly, it will be toxic to some extent, but not more toxic than ordinary petroleum products; In case of skin contact, wash thoroughly with detergent, soap and water.
Product parameters
performance | index | Experimental method |
density(20℃)kg/cm3 | 890~940 | GB/T1884 |
nitrogen content % | 1.1~1.3 | SH/T2070 |
Boron content % | 0.3~0.4 | SH/T0227 |
viscosity(100)℃mm2/s | <200 | GB/T265 |
impurity% | <0.08 | GB/T511 |
Flash point (opening)℃ | >180 | GB/T267 |